TECHNICAL SUPPORT : Dial-Up : Windows 95/98/ME

Dial Up Setting:

Windows 95/98/ME Setup:

1. Double click the My Computer icon

2. Double click the Dial-up Networking folder

3. Double click the Make New Connection icon

4. Under Type a name for the computer you
are dialing, type RipNET

5. Click the Configure button

6. Check that the appropriate speed for your modem (for 14.4 modems use 19200, for 28.8 modems use 38400, for 33.6 modems use 57600, and for 56K modems use 115200)

7. Make sure that only connect at this speed is NOT checked

8. Click the OK button

9. Click the Next button

10. In the Area type your local RipNET access number

RipNET Limited Dial-In Number's:
Brockville: Primary: 498-4638,
Smith Falls: Primary: 253-7747
Kemptville: Primary: 236-3813
Cornwall: Primary: 930-9312

11. Click the Next button

12. Click the Finish button

13. Click the RipNET icon

14. From the menu bar, click File and select Properties

15. Click the Server Type button

16. For Type of Dial-up Server, select PPP: Windows 95/98, Windows NT 3.5, Internet

17. Uncheck Log on to network

18. Uncheck Enable software compression

19. Uncheck require encrypted password

20. Uncheck NetBEUI

21. Uncheck IPX/SPX Compatible

22. Check TCP/IP

23. Click the TCP/IP Settings button

24. Select the Server assigned IP address button

25. Select the Server assigned DNS button

26. Check both Use IP header compression and Use default gateway on remote network

27. Click the OK button on all other windows